KEBA EV charger covers, stands and charging structures

For KEBA chargers, including models in the KeContact family, an additional mechanical shield or a freestanding structure can be evaluated. The correct VoltaCover solution depends on the exact model, dimensions and installation conditions.

Check before ordering

• overall charger dimensions and connection area;
• access to display, controls, connector and cable;
• ventilation and maintenance clearances required by KEBA;
• cable route and technical passages;
• mounting surface or foundation for freestanding installations.

VoltaCover options for KEBA

• Wallbox Cover – compact wall-mounted cover.
• Wallbox Cover Plus – with a 6 cm rear technical compartment where the installation allows it.
• Stand – freestanding structure with an internal technical compartment.
• Vela – premium freestanding solution with an architectural approach.

Other VoltaCover options include Cyber and Crystal Shell; Crystal Shell uses tinted polycarbonate for upper and front shielding and includes an integrated structural rear support.

Important

A VoltaCover solution does not make the charger waterproof and does not change its IP rating. Manufacturer instructions, operating and ventilation clearances and applicable electrical regulations remain authoritative. Electrical design and installation must be handled by qualified professionals.

Wall-mounted or freestanding?

Where a suitable wall is available, Wallbox Cover or Cover Plus can be assessed. Where no suitable wall is available, Stand or Vela can be considered. Fixing, cable route, accessibility and available space must be checked for the real site.

Wallbox cover, stand and charging structure overview

Need a preliminary check? Send us the KEBA model, dimensions and a photo of the planned installation.