VoltaCover wallbox compatibility
VoltaCover wallbox compatibility
Compatibility depends on more than the wallbox brand. Dimensions, cable route, connector or socket position, controls, fixing points and available space determine which VoltaCover solution can be used correctly.
Where to start
Wallbox already installed on a wall
Cyber and Wallbox Cover are the most direct options to assess. Crystal Shell can also be considered when its integrated structural rear support can be correctly accommodated without interfering with the wallbox, cabling or manufacturer clearances.
New wall installation
Wallbox Cover Plus adds a 6 cm rear technical compartment that can help organise compatible cabling and installation provisions. Crystal Shell can be evaluated when its support and the wallbox fixing can be planned together.
No suitable wall
Stand and Vela are freestanding solutions. The installer must define the final fixing or foundation, cable route and electrical configuration according to the site.
The six VoltaCover solutions
| Solution | Typical use |
|---|---|
| Cyber | Compact upper shielding for wall-mounted wallboxes. |
| Wallbox Cover | Classic wall-mounted cover in different sizes and finishes. |
| Crystal Shell | Upper and frontal shielding in darkened polycarbonate with integrated structural rear support. |
| Wallbox Cover Plus | Wall-mounted cover with a 6 cm rear technical compartment. |
| Stand | Freestanding structure with internal technical compartment. |
| Vela | Premium freestanding architectural solution for visible or representative charging points. |
What to check before ordering
- overall wallbox width, height and depth;
- position and movement of connector, cable or socket;
- access to display, buttons, doors and service areas;
- space needed to connect and disconnect the vehicle comfortably;
- manufacturer requirements for ventilation, maintenance and clearances;
- wall fixing surface or foundation conditions for freestanding solutions;
- cable entry and route behind or below the structure.
Wallbox brands
VoltaCover solutions can be evaluated for charging stations from brands such as Tesla, Wallbox, ABB, KEBA, ABL, Alfen, Zaptec, Easee, MENNEKES, go-e and Webasto. Brand references indicate possible evaluation contexts only: they do not mean universal compatibility or an official partnership with the manufacturer.
Preliminary compatibility check
Send us the wallbox brand and exact model, a photo of the planned installation, the available measurements and, where possible, the cable entry position. We can then perform a preliminary mechanical suitability check before supply.
All trademarks and product names belong to their respective owners.