Huawei Smart Charger: wallbox covers and stands

Already using a Huawei Smart Charger, or planning a charging point linked to solar PV? This page connects the residential SCharger‑7KS‑S0 and SCharger‑22KT‑S0 models with VoltaCover solutions for supplementary protection, cable organisation and freestanding installation.

Identify the exact product: Huawei also uses FusionCharge for high-power DC charging systems. This page covers only the residential AC Smart Charger S0. Do not transfer its measurements or pairings to other Huawei products.

Huawei SCharger‑7KS‑S0 / SCharger‑22KT‑S0

Model	Power	Supply	Size and weight	Vehicle connection	Protection
SCharger‑7KS‑S0	1.4–7.4 kW	230 V single-phase	335 × 180 × 145 mm 3.0 kg	Type 2 socket	IP54, IK10
SCharger‑22KT‑S0	up to 22 kW	400 V three-phase	335 × 180 × 145 mm 3.1 kg	Type 2 socket	IP54, IK10

Huawei specifies wall mounting and indoor/outdoor use. Data may vary by market, version and product update; always check the installed unit label and manual.

If the Smart Charger is already wall-mounted

A VoltaCover cover can also be considered after installation. It must allow for the 145 mm depth, front Type 2 connection, LED indication and removal of the charger from its rear support. It does not change IP54 or replace Huawei installation requirements.

Cyber

Compact upper shield. Check overhead space and removal for servicing.

View Cyber →

Wallbox Cover

Upper and side protection. Size around the body, front socket and cable bend.

View Wallbox Cover →

Crystal Shell

Transparent upper and front shield. Check socket, LED and service access.

View Crystal Shell →

Stand

Freestanding support where no suitable wall exists. Check wiring, mounting and servicing as a project.

View Stand →

Separate cable and Type 2 socket

Both S0 models use a Type 2 socket rather than a fixed cable. Connector insertion, removal and storage of the user's cable must remain clear. Crystal Shell 360 may be checked for manual cable storage and plug holder; Cover Plus provides rear technical space. Both require dimensional and installation checks.

Installation without a suitable wall

For residential parking, businesses, hospitality and PV projects, consider Stand, Vela or Station 360. These are independent VoltaCover systems; pairing with 7KS‑S0 or 22KT‑S0 must be confirmed for the project.

Check before buying

front and side photos
exact model: 7KS‑S0 or 22KT‑S0
335 × 180 × 145 mm verified on the real unit and clearances
Type 2 socket access and cable bend radius
visibility of LED, RFID and service access
top or bottom cable entry, wall/foundation and installer requirements

Send the model, measurements and photos

We identify which VoltaCover family should be checked from the real Huawei installation, not the brand name alone.

Request a check → View all brands →

Official Huawei sources

Sources last checked: 26 September 2026. Images show VoltaCover solutions and do not prove compatibility. Huawei, FusionSolar, FusionCharge and product names belong to their respective owners. No Huawei approval, certification or partnership is implied.